Oakley – Validation
Please take 16 minutes to sit down and enjoy this amazing, spectacular, well thought, and well shot short film. I guarantee it’ll put a smile on your face and inspire to make someone close to you or even a complete stranger smile too. Feel free to pass this along as it has a message that I believe everyone in the world needs to hear.
Oakley – Night Time Photography
My effort in taking pictures of the stars didn’t quite end in total failure. Due to a full moon, it simply was too bright outside to try and capture the stars so I’ll have to wait a bit until the next clear and moonless sky. On the bright side (pun intended :P) I did get to try out my long exposures on a few other things… Like a bicycle and even the moon!
Below is an edited photograph I took of a bike waiting at the end of some stars near my residence–this was done completely in Adobe’s Camera RAW. Further down is the original photo. You can tell immediately shooting in the dark is quite feasible with some decent equipment (such as my tripod) and post-processing.
Oakley – Day One at UNT
Environmental Building: This is where I have my first class of the week (Physics: The Solar System) I’m SO looking forward to the labs! We’ll be making trips to an observatory, a planetarium and other interesting locations for experimentation.
Due to the fact that I’ll be studying our very own solar system, I’m also going to dedicate some time to learn and research aerial and nighttime photography. There’s a lot you can do with long exposures including what’s called “Timescapes.” Basically you allow your digital camera to take sequential photographs at long exposures and long periods of time. Once you get enough photographs you can then take those photos into a video editor and play them back at high-speed and watch the earth’s rotation!
I have enough memory to take well over a thousand pictures at JPEG Fine; however, I’m considering taking the photos in RAW depending on what I discover online…. That’s a lot of space to take up on my hard drive though… Of course, I want to research how to actually do something like this before I try it out for myself since I don’t really want to fail my first attempt just trying to figure out the right settings. Hopefully I’ll accomplish this task soon and I can share the work and show you how it’s done. In the mean time, look forward to more photographs and stories!
Peace Out
^_^ \/
Oakley – The Anderson Family 2011

OTM_2547, originally uploaded by otmpromedia.
Oakley – Capturing the Light
Hello everyone!
I must apologize for not posting very much lately. I know the site is new and keeping it updated has presented a slight challenge for me. However, I’ve been quite busy getting ready for my education at the University of North Texas and it’s kept me quite occupied. I tell you what though, being here has me so excited! There’s so much being offered here, so many opportunities and so much potential I almost don’t know what to do with myself!
Although I still have a few more basic courses to get out of the way this semester, I hope to take as much advantage of the situation as possible. I’ll have plenty of reading to keep me busy and this will be a perfect time to generate some great ideas for all the productions I’ll be working on in years to come.
Meanwhile, I’m still trying to get some of my course work situation and living situation under way I’d now like to introduce a special guest who was a fellow stundet of mine while I studied at Houston Baptist University. His name is David Matthew and is disciplined in the traditional arts with a BA from the university. Currently he is working on his portfolio to be evaluated at the California Institute of the Arts (or Cal Arts) in the pursuit of a career in animation.
From what some of you may have already read on my blog, I have a particular passion for animation myself. Although I am strictly working in photography and film at the moment it is one of my many dreams to one day work in this “medium” of communications and story telling. So with that, David, take it away!
Oakley – Don’t let Strong Bad video your wedding. . .
This was too funny not to share xD
Just click on the link and watch Strong Bad read his latest email.
Enjoy!
http://www.homestarrunner.com/sbemail205.html
Oakley – Working in the Dark
Recently I had the pleasure of capturing the talent of a Hempstead Church Family out at TJM ranch and part of the challenge was shooting in the dark. Now I wasn’t literally in the dark; I did have the luxury of a work light but it still presented a problem for not only myself but a few other photographers who were working on and in the show. A young friend of mine who is an excellent photographer had a few questions about how to shoot better pictures in the dark and these are a few ideas that I had that I would like to share with the rest of you photo enthusiast and professionals. As I am continuing to learn myself, please feel free to correct me or clarify where I may be wrong.
There are a few options to shoot better in the dark. Frankly, if there isn’t enough light to get a good shot, add more light! But that’s not always an available option so we have to get a little creative at times… If you’re shooting still images (like portraits for instance) always try to get a Tri-pod setup for this will reduce vibrations and user handling immensely. For clarity I’m going to list a few steps in a numerical order…
I. Add more light! If you can, this is your best option because it gives you the most control.
1.You can add more light with “hot lights” (or lights that are always on) like the work light we used for the Talent show).
2. You can use flashes. Now, some flashes can be a bit pricy but I encourage you to think about investing in an external flash that has an adjustable head. Especially get a flash that you can point up at the ceiling. Generally speaking, the best kind of light to use is “reflective light.” Think about it in real life; the sun is always above us and a lot of the light we see is being bounced off of walls, the floor, etc NOT pointed directly at us. So when you’re adding more light, always try to point it coming from an angle. Bouncing light also creates “difusion” which gives you softer skin tones and softer shadows. Now keep in mind that a lot of this has to do with you’re own personal style. Maybe you want HARD and DARK shadows? *shrugs* It’s totally up to you, but keep in mind that reflected and diffused light gives better results in regards to realism.
II. But, we don’t always have more light… Although it reduces your creative freedom by a tad, grab a Tripod. They’re bulky and no fun to carry around but, unlike you, they don’t rock.
III. Aperture vs Shutter Speed
Okay, so I’m assuming you already know a good bit of photography but if I need to explain anything for you in dept, please let me know.
Now with photography, there’s always this ongoing battle with all the different settings; photography is a win-lose situation.
When you exchange a narrow aperture with a wide one and a faster shutter speed, you get very shallow depth of field but sharper images. In certain situations, you’ll find that there’s just “too much” that’s out of focus… So you’re like, gosh darnit, now I have to have a slower shutter speed and a smaller aperature…
The other problem you have with slower shutter speeds is “motion blur” which I’m sure you and I share the same burning indifference for…
f/3.5 1/50 ISO 1600 Notice in this image there’s a lot of motion blur. This could have been avoided had I used a wider aperture (f/1.8) and a much faster shutter speed. Ideally when capturing motion it’s best to have a shutter speed of 1/250- 1/400. I could have possibly done this at a higher ISO (3200) and the area’s lighting a bit more balanced. Remember, there’s less focus at wider apertures. Of course, there’s an array of fancy lenses and better camera’s out there, but I’d just like to cover what I know for general users.
If you need a smaller aperture but faster shutter speed, you’re reducing the time the sensor has to absorb the light and your images come out too dark! But! If you use a good tripod and are shooting stills for the most part, you can manage to have a smaller aperture [for clarity] and a slow shutter speed [for a good exposure]. It’s a different story for capturing motion I’m afraid. Here you must try to add as much light as possible whether that be by artificial means or by having a wider aperture.
Now one last thing about aperture:
I’m not sure what kind of lens you may own but the “wider” your aperture or the “smaller” the f-stop, the more light is let in for an exposure. Having a wider aperture or an “open” iris means more light, faster shutter speed, shallow depth of field, and a good exposure. Right now I own a 35mm prime which means It’s a fixed focal length and if I want to get a closer shot I physically have to move in closer… However, this 35mm prime lens has a wide aperture of 1.8 f-stops which means the hole the light travels to the sensor is practically wide open. This affects both exposure and depth of field… Always keep that in mind: The wider the aperture the shallower the depth of fiend and less focus you will have on a given subject; however, it also means more light.
IV. ISO
ISO standers has to do with the “sensitivity” of your sensor. The higher the ISO the more sensitive your sensor will be to the incoming light.
Now film ISO and Digital ISO are a tad different but essentially the same…
Back in the day of black and white Film, pictures were formed by silver halides which the more sensitive they were to light the faster they absorbed and expanded to create a picture… However, because of a high sensitivity, the halides would expand so fast that “gaps” were created forming what we call “grain.”
With color pictures it get’s a little bit more complicated but this is to help illustrate what is going on with ISO standards.
In the digital realm, the same thing is essentially going on except instead of grain we call it noise.
The greater the ISO the more sensitive your sensor and camera’s processor becomes. Now today camera’s keep getting better and better and we can use very high ISOs to get pictures in low lit situations… From what I’ve observed, digital noise is starting to look more like film grain which is excellent but still a problem. For instance, last night I was shooting at an ISO of 3200. Now this is an incredibly high rating, the pictures still came out decently enough to where they could be used. In some situations, you can shoot at VERY high ISO’s and then convert your images to B & W taking advantage of the noise that was created and calling it grain. This is an artistic method but it doesn’t always work out the best… Just mentioning that to give you some options.
f/1.8 1/250 ISO 1600
Notice that my image didn’t come out very clear. However, I was still able to apply some effects. If worse comes to worse, you can still use an image for creative purposes and if anyone asks, “You did it on purpose.”
Normally, if I’m outside and it’s a sunny day, I’ll try to shoot at an ISO of 100-400. Notice that the smaller the ISO number the most clarity your image will have. 100-200 is most ideal for portraits.
In darker situations (like indoors), I’ll shoot 800-1600 and that’s without a flash.
Having a higher ISO will allow you to use smaller aperture settings and faster shutter speeds.
Just remember that increasing your ISO setting will increase the amount of “grain” or “noise” in your picture. Which, btw, can be somewhat edited out in Photoshop at times if you ever get into post-production work.
I plan on giving an in depth tutorial of Adobe’s “Camera Raw” but for now I would like to keep this discussion strictly to photography.
Well I hope this helps some and if you have any questions or comments, please feel free to share them!
Let’s learn from each other and make a difference one frame at a time.